The Apollo can be used in two ways. When the Linx Bubbler is attached to the base, the Apollo becomes a portable electric dab rig. This small dab rig kit remains compact, portable and can be carried around with the Linx carrying case. When the Apollo is used with the Linx Carb Cap and plugged into your bong or dab rig, it acts as an E-nail, delivering massive clouds and clean flavor.
No. The Apollo is designed for use with concentrates only.
The Apollo doesn't require much concentrate to produce large clouds, it is recommended to use the size of a rice grain for each use.
Place a grain of rice sized amount of concentrate onto the center of the quartz heating chamber with a tool. Do not use force as quartz is clean and safe to use but fragile.
The Apollo can attach to any water pipe with a 14mm or 18mm downstems, male or female.
Once Apollo is powered on, hold the button to activate Power Boost. The power indicator will rotate quickly, indicating the Apollo is boosted to its highest temperature (600F). Heat Boost can be very useful to reach max temperature instantly for big clouds, or heat off the leftover concentrates to minimize waste.
Yes, Apollo works great with Budder Cups.
On average the Apollo heats up in 8 seconds with a 30 seconds heat cycle.
Apollo is designed to allow you to troubleshoot the device yourself.
Â
Short Circuit Protection - Flash white three times When the atomizer is short-circuited or broken, Apollo shuts off automatically. Replace with a new atomizer immediately.
Atomizer Undetected - Flash white five times When the atomizer is not present or doesn’t connect well with the Apollo base, the device will shut off automatically. Screw the atomizer to the Apollo base, make sure they are tightly attached.
Low Battery Indication - Flash white ten times When the battery runs low, charge Apollo before next use.
In order to prevent water from escaping from the bottom of the water bubbler, you must inhale from the top of the bubbler. This creates a water seal that will prevent any water from escaping. Make sure to do this prior to attaching the water bubbler to the Apollo.
Use your finger to cover the Air Path Regulator at bottom of the Apollo Base. Doing so will restrict the airflow going into the atomizer. Release your finger when you wish to add more air.
Open and close the Carb Cap to direct the airflow and regulate the amount of air going into the atomizer.
It's recommended to clean the atomizer after each final use in order to prevent any buildup of concentrates.
When taking draws from the Apollo, concentrates may build up and clog the air paths. Clear the air paths for the optimal draws. Wet the brush provided with Isopropyl Alcohol and gently rotate the brush in and out of the air paths to clear any concentrate buildup. Do this as many times as needed till the air paths are completely clear.
Apollo is covered by one year limited warranty. If you have warranty questions or need support, please contact us by submitting a ticket, select "Warranty". Make sure to include your order number (LNXVPR followed by numbers), product and a detailed description of the issues so we can start the warranty service. Videos or pictures are recommended if available.  Please do not tamper any parts of the device as tampering will void your warranty.  Also check out our warranty page for detail coverage.
