- Free U.S. shipping for orders $60+
- Ships same day if placed M-F before 2:30pm PST except holidays, with discreet packaging
- Custom duties & fees not included in oversea shipmentsShips to Canada, Australia and UK
ONE DEVICE TWO EXPERIENCES | #ONEFORALL
Use the Apollo on-the-go with included Linx portable bubbler or on desktop by fitting the device onto any glassware
"this epic namesake carries on with the Linx Apollo — the best concentrate vape of 2021."
PREPARE FOR LIFT-OFF
From microdosing to recreational sessions and from the comfort of your home to wherever you are going, the Apollo is the ultimate dabbing device.
Get larger clouds, longer sessions and the purest vapor, all while using less of your material.
For a proper blast off, the heat boost will allow you to get massive hits and clouds.
Control the temperature, toggle between 4 heat temps and enjoy vaping your way.
The patented quartz chamber delivers amazingly clean vapor and is easy to clean without exposed coil.
FITS MOST GLASSWARES
Compatible with male and female glassware (fits 14mm and 18mm downstems)
All quartz heating chamber. 11.5 mm (diameter) x 7 mm (height).
Lithium-ion battery recharges in 3 - 4 hours via USB. 2600 mAH.
Patented in-laid all quartz chamber heats instantly and evenly. No exposed heating coil.
APOLLO BASE DIMENSION
60 mm (height) x 40 mm (length) x 40 mm (width)
APOLLO BASE WEIGHT (with atomizer)
5.3 oz / 150 g
Work with glassware or Linx bubbler All quartz heating chamber One touch heat boost Four preset temperatures Smart and accurate heating control 2600mAH large capacity battery Airflow regulation Metal casing Carrying case included Heavy metals tested Fits male and female glasswares
Easy to maintain
1 2600mAH Linx Apollo Base 1 All Quartz Atomizer 1 Carb Cap 1 Glass Bubbler 1 Silicone Airflow Regulator 1 Silicone Airflow Sleeve 1 Tool 1 USB Charging Cable 1 Cleaning Brush 1 Carrying Case 1 Male Water Pipe Adaptor (fits 14mm or 18mm downstem)
The Apollo can be used in two ways. It becomes a standalone device when attached to the Linx bubbler. The whole kit remains compact, portable and can be carried around with the Linx carrying case. When the Apollo is plugged into your glassware, it acts as an e-rig and becomes a parts of your desktop glassware, delivering massive clouds and clean flavor.
No. The Apollo is designed for use with extracts only.
The Apollo doesn't require much extracts to produce large clouds, it is recommended to use the size of a rice grain for each use.
Place the extracts directly onto the center of the quartz heating chamber with a tool. Do not use force as quartz is clean and safe to use but fragile.
The Apollo can attach to any water pieces that is fitted with a glass-on-glass joint with 14mm or 18mm downstems.
Once Apollo is powered on, hold the button to activate Power Boost. The power indicator will rotate quickly, indicating the Apollo is boosted to its highest temperature (600F). Heat Boost can be very useful to reach max temperature instantly for big clouds, or heat off the leftover extracts to minimize waste.
Yes, Apollo works great with Budder Cups.
On average the Apollo heats up in 8 seconds with a 30 seconds heat cycle.
Apollo is designed to allow you to troubleshoot the device yourself.
Short Circuit Protection - Flash white three times When the atomizer is short-circuited or broken, Apollo shuts off automatically. Replace with a new atomizer immediately.
Atomizer Undetected - Flash white five times When the atomizer is not present or doesn’t connect well with the Apollo base, the device will shut off automatically. Screw the atomizer to the Apollo base, make sure they are tightly attached.
Low Battery Indication - Flash white ten times When the battery runs low, charge Apollo before next use.
In order to prevent water from escaping from the bottom of the water bubbler, you must inhale from the top of the bubbler. This creates a water seal that will prevent any water from escaping. Make sure to do this prior to attaching the water bubbler to the Apollo.
Use your finger to cover the Air Path Regulator at bottom of the Apollo Base. Doing so will restrict the airflow going into the atomizer. Release your finger when you wish to add more air.
Open and close the Carb Cap to direct the airflow and regulate the amount of air going into the atomizer.
It's recommended to clean the atomizer after each final use in order to prevent any buildup of extracts.
When taking draws from the Apollo, extracts may build up and clog the air paths. Clear the air paths for the optimal draws. Wet the brush provided with Isopropyl Alcohol and gently rotate the brush in and out of the air paths to clear any extract buildup. Do this as many times as needed till the air paths are completely clear.
Apollo is covered by one year limited warranty. If you have warranty questions or need support, please contact us by submitting a ticket, select "Warranty". Make sure to include your order number (LNXVPR followed by numbers), product and a detailed description of the issues so we can start the warranty service. Videos or pictures are recommended if available. Please do not tamper any parts of the device as tampering will void your warranty. Also check out our warranty page for detail coverage.
We deploy Bluecheck for age and identity verification. 90% of customers will be verified instantaneously and some will receive an email from Bluecheck for verification. We do not access or store any data beyond your order information.